|
|
 |
Ceramat Gas Burner FP for gas cooking appliances |
 |
|
 |
|
 |
|
| Highest level |
| Comfort and safety
|
|
| Ceramat Gas Burner FP is an extremely effective burner medium made of silicon carbide coated ceramic fibers solidly welded together to form a self-supporting mat structure. This highly permeable, homogeneous, perforated burner mat is ideally suited for radiant gas burners in cooktops. It meets all requirements for faster visibility and responsiveness, higher performance and reliability even with varying types of gases and changing pressures. |
|
|
|
 |
|
| Characteristics |
|
 |
Full, bright radiation within one second after ignition: cookware is immediately heated, and the heating process is clearly visible to the user. |
|
|
|
High specific load: boil-up times are very short. |
|
|
|
Fast reaction: the desired temperature for each cooking zone can be individually controlled with high precision. |
|
|
|
Uniform heat distribution: the homogeneous burner surface ensures uniform heat transfer to the pan, even at low settings. |
|
|
|
Stable combustion: with all common gas types and limit gases, burners ignite and operate safely with Ceramat Gas Burner FP. |
|
|
|
Optimal heat efficiency: the hot burner exhaust gases can be used to heat simmer zones. |
|
|
|
Clean surface combustion: very low NOx and CO emissions reduce the environmental impact. |
|
|
|
Variable geometry: even roasting disk zones are possible. |
|
|
|
Optimized: Ceramat Gas Burner FP can be used in gas burners under glass cooking systems. |
|
|
|
|
|
 |
|
| Technical data |
| (for this specific application) |
|
 |
Type of combustion: |
Premix, fan assisted or atmospheric |
|
|
|
Application: |
Gas cooking appliances with glassceramic cooktop panels |
|
|
|
Dimensions: |
Diameter: 145, 180, 210 mm (5.7, 7.0 and 8.3 inches)
Max. diameter: 250 mm (9.8 inches) or according to customer specification |
|
|
|
Perforation: |
Variable perforation according to customer specification |
|
|
|
Geometry: |
Variable flat geometry according to customer specification |
|
|
|
Thickness: |
3.2 +/- 0.5 mm (0.126 +/-0.02 inches) |
|
|
|
Gas types: |
All gas types according to EN 437,ANSI Z21.1 ff. (natural gas, propane, town gas) |
|
|
|
Specific load: |
1 - 2 Kw/dm2 (31,700 - 63,400 BTU/hr/ft2) |
|
|
|
Pressure drop: |
< 3 Pa
(< 0.000435 PSI)
depending on perforation and specific load |
|
|
|
Maximum surface temperature: |
1.000 °C (1,850 °F) |
|
|
|
Maximum temperature difference on the
surface and between upper and lower side: |
800 ºC |
|
|
|
Color: |
Anthracite black |
|
|
| Please follow Ceramat mounting instructions. Complete burner modules also available. |
|
|
|
|
|
|
|
|
