|
|
 |
Ceramat Gas Burner FN for industrial furnaces and dryers |
 |
|
 |
|
 |
|
| Instant reactivity |
| Optimized production
|
|
| Ceramat Gas Burner FN is a highly effective burner medium made of silicon carbide coated ceramic fibers solidly welded together to form a self-supporting mat structure. This highly permeable, homogeneous burner mat is ideal for radiant gas burners in industrial furnaces and drying installations. |
|
|
|
 |
|
| Characteristics |
|
 |
Instant reaction: full radiation is obtained within three seconds after ignition. And the radiation stops when the burner is shut off. The temperature of Ceramat Gas Burner FN surface immediately drops to a point where it can be safely touched. By effectively preventing residual heat and avoiding long pre-heating periods, this fast reaction provides for optimal system control. |
|
|
|
Homogeneus mat structure: Ceramat Gas Burner FN ensures uniform radiation |
|
|
|
Clean surface combustion: very low NOx and CO emissions reduce the environmental impact. |
|
|
|
High efficiency: a properly matched system with Ceramat Gas Burner FN saves energy costs, especially when compared to electric heating systems. |
|
|
|
Wide modulation range: the desired temperature can be set precisely and is easily adjustable when required. |
|
|
|
Variable geometry: the burner medium makes it possible to precisely adapt the burner surface to the requirements of the installation. |
|
|
|
Rigid, self-supporting structure: very low thermal expansion and low pressure drop simplify burner design. |
|
|
|
High temperature resistance: despite high specific loads the burner surface has a long life expectancy. |
|
|
|
|
|
|
 |
|
| Technical data |
| (for this specific application) |
|
 |
Type of combustion: |
Premix, fan assisted |
|
|
|
Application: |
Industrial furnaces and dryers with radiant gas heaters |
|
|
|
Dimensions: |
Max.: 1.200 x 300 mm (47.2 x 11.8 inches) or according to customer specification. Individual Ceramat Gas Burner can be combined to form larger burner surfaces |
|
|
|
Geometry: |
Variable flat geometry according to customer specifications |
|
|
|
Thickness: |
3.5 +/- 0.7 mm (0.138 +/- 0.028 inches) |
|
|
|
Gas types: |
All gas types according to EN 437, ANSI Z21.1 ff. (natural gas, propane, town gas) |
|
|
|
Radiation range: |
1 - 6 Kw/dm2 (31,700 - 190,200 BTU/hr/ft2) |
|
|
|
Modulation range: |
1:6 |
|
|
|
Pressure drop: |
< 7 Pa at 1.5 Kw/dm2
< 15 Pa at 6 Kw/dm2
(< 0.001015 PSI at 47,550 BTU/hr/ft2
< 0.002175 PSI at 190,200 BTU/hr/ft2) |
|
|
|
Maximum surface temperature: |
1.000 °C (1,850 °F) |
|
|
|
Maximum temperature difference on the
surface and between upper and lower side: |
800 ºC |
|
|
|
Color: |
Anthracite black |
|
|
| Please follow Ceramat mounting instructions. Complete framed burner also available. |
|
|
|
|
|
|
|
|
